HP 25mx, Руководство по техническому обслуживанию и ремонту

Страница: 20 / 27

18
Main board- Connector repair (Audio, HDMI and
DisplayPort)
Repair Condition: Connector repair is only for the monitor that has been out
of warranty period.
•
The repair procedure is for Audio, HDMI and DisplayPort connectors.
•
The connectors are on the main board (IF board part number 5E.49201.011).
•
Please refer to the location to repair the correct parts:
Connector Location
Audio M1
HDMI J2
DisplayPort J3
IMPORTANT:
•
Repair Condition: Connector repair is only for out of warranty.
•
Repairing must operate by professional repairers (Note) in repair center, not
applicable for end user.
•
Electrostatic protection is required when component replacement is required.
•
The monitor meets ROHS, please use Lead-free solder wire for soldering.
•
If Connector need to replace, must check specification and part number whether
match the BOM and location.
•
If connector need to replace, please insert new parts carefully because the near
pin may cause short circuit by inappropriate operate.
Main Board