18
2)
Lift the P6 connector from the PCB.
3)
Place the new component on the PCB. Be sure that it matches the PCB footprint.
4)
Solder the new component.
HDMI connector P3 (P4)
Repair the HDMI connector:
1)
Use a soldering iron and a desoldering pump to remove as much solder as possible from the pin.
2)
Use a hot air gun to melt the solder on the pins.
3)
Lift the J2 connector from the PCB.
4)
Place the new component on the PCB. Be sure that it matches the PCB footprint.
5)
Solder the new component.
Содержание 24fh
Страница 1: ...Maintenance and Service Guide 24fh model 27fh model ...
Страница 11: ...7 Safety label ...
Страница 19: ...15 Step 5 Strip the screws 4pcs Strip the other screws 8pcs from the M B ...
