
Fingerprint reader board
Table 5-9
Fingerprint reader board description and part number
Description
Spare part number
Fingerprint reader board
NOTE:
The fingerprint reader board spare part kit does not include the cable. The cable is available as
spare part number L63596-001.
L63595-001
Before removing the fingerprint reader board, follow these steps:
1.
Prepare the computer for disassembly (
Preparation for disassembly on page 27
2.
Remove the bottom cover (see
3.
Remove the battery (see
).
4.
Remove the card reader/audio board (see
Card reader/audio board on page 37
).
Remove the fingerprint reader board:
1.
Remove the Phillips M2.0 × 2.5 screw (1) that secures the fingerprint reader bracket to the computer.
2.
Rotate the bracket upward (2), and then remove the bracket from the computer (3).
3.
Disconnect the cable from the ZIF connector on the fingerprint reader board (4), and the remove the
board from the computer (5).
Reverse this procedure to install the fingerprint reader board.
40
Chapter 5 Removal and replacement procedures for authorized service provider parts
Содержание 15
Страница 4: ...iv Safety warning notice ...
Страница 8: ...viii ...