HP 15 Скачать руководство пользователя страница 14

Страница: 14 / 88

Table 2-1

Right-side components and their descriptions (continued)

Component

Description

●

Blinking: The computer is in the Sleep state, a power-
saving state. The computer shuts off power to the display
and other unneeded components.

●

Off: The computer is off or in Hibernation. Hibernation is a
power-saving state that uses the least amount of power.

(4)

Drive light (select products only)

●

Blinking white: The solid-state drive is being accessed.

(5)

USB Type-C port

Connects a USB device, such as a cell phone, camera, activity
tracker, or smartwatch, and provides data transfer.

NOTE:

Cables and/or adapters (purchased separately) may be

required.

(6)

HDMI port

Connects an optional video or audio device, such as a high-
definition television, any compatible digital or audio component,
or a high-speed High-Definition Multimedia Interface (HDMI)
device.

Chapter 2 Getting to know your computer

Содержание 15

























































































Результаты поиска

Содержание 15

Отзывы:

HP 15, Руководство по техническому обслуживанию и ремонту, Страница: 14 / 88

Результаты поиска

Содержание 15

Отзывы: