IR sensor board
NOTE:
Liquid metal thermal grease is available as spare part number L65923-001.
Table 6-10
IR sensor board description and part number
Description
Spare part number
IR sensor board
L57021-001
Before removing the IR sensor board, follow these steps:
1.
Prepare the computer for disassembly (
Preparation for disassembly on page 26
2.
Remove the bottom cover (see
3.
Remove the battery and speakers (see
Battery and speakers on page 32
).
4.
Remove the solid-state drive (see
Solid-state drive and Optane Memory Module on page 29
5.
Remove the heat sink/fan assembly (see
Heat sink/fan assembly on page 35
).
6.
Remove the second display transfer board (see
Second display transfer board on page 38
7.
Remove the power connector board and bracket (see
Power connector cable on page 39
8.
Remove the system board (see
).
Remove the IR sensor board:
1.
Remove the two Phillips M2.0 × 2.5 screws (1) that secure the board to the computer.
2.
Remove the board and cable from the computer (2).
Reverse this procedure to install the IR sensor board.
46
Chapter 6 Removal and replacement procedures for authorized service provider parts
Содержание 15-dq0000
