HP 11at-nb000, Руководство по техническому обслуживанию и ремонту

Страница: 37 / 56

1. Prepare the computer for disassembly ( Preparation for disassembly on page 21 ).
2. Remove the keyboard/top cover ( Keyboard/top cover on page 21 ).
3. Disconnect the battery cable from the system board (see Battery on page 25 ).
4. Remove the screws from the left hinge, and then rotate the hinge upward (see Display assembly
on page 33 ). This step provides access to the tape under the hinge.
Remove the system board:
1. Disconnect the following cables from the system board:
● Two USB cables (ZIF) (1)
●
Camera cable (2)
●
Adhesive strip (3) and display cable (4)
●
Speaker cable (5)
2. Remove the six Phillips M2.0 × 4.1 screws (1) that secure the system board to the computer.
3. Remove the system board bracket (2).
4. Lift the left edge of the system board (3) until it rests at an angle.
Component replacement procedures 31