HP 10500 series, Руководство по настройке безопасности

Страница: 401 / 596

387
e. Select Connection > SSH > Auth from the navigation tree.
The window shown in Figure 107 appears.
f. Click Browse… to bring up the file selection window, navigate to the private key file
( private.ppk in this example), and click OK .
Figure 107 Specifying the private key file
a. Click Open to connect to the server.
If the connection is successfully established, the system notifies you to enter the username.
After entering the username (
client002 ), you can enter the CLI of the server.
Password authentication enabled Stelnet client configuration
example
Network requirements
As shown in Figure 108 :
•
Switch B acts as the Stelnet server and uses password authentication.
•
The username and password of the client are saved on Switch B.
Establish a connection between Switch A and Switch B, so you can log in to Switch B to manage
configurations.
Figure 108 Network diagram