320
Step Command
Remarks
3.
Configure a pre-shared
key.
•
In non-FIPS mode:
pre-shared-key
{
address
{
ipv4-address
[
mask
|
mask-length
] |
ipv6
ipv6-address
[
prefix-length
] } |
hostname
host-name
}
key
{
cipher
cipher-key
|
simple
simple-key
}
•
In FIPS mode:
pre-shared-key
{
address
{
ipv4-address
[
mask
|
mask-length
] |
ipv6
ipv6-address
[
prefix-length
] } |
hostname
host-name
}
key
[
cipher
cipher-key
]
By default, no pre-shared key is
configured.
For security purposes, all
pre-shared keys, including
those configured in plain text,
are saved in cipher text to the
configuration file.
4.
(Optional.) Specify a local
interface or IP address to
which the IKE keychain
can be applied.
match local address
{
interface-type
interface-number
| {
ipv4-address
|
ipv6
ipv6-address
} [
vpn-instance
vpn-name
] }
By default, an IKE keychain can
be applied to any local interface
or IP address.
5.
(Optional.) Specify a
priority for the IKE
keychain.
priority
number
The default priority is 100.
Configuring the global identity information
Follow these guidelines when you configure the global identity information for the local IKE:
•
The global identity can be used by the device for all IKE SA negotiations, and the local identity
(set by the
local-identity
command) can be used only by the device that uses the IKE profile.
•
When signature authentication is used, you can set any type of the identity information.
•
When pre-shared key authentication is used, you cannot set the DN as the identity.
To configure the global identity information:
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Configure the global identity
to be used by the local end.
ike identity
{
address
{
ipv4-address
|
ipv6
ipv6-address
} |
dn
|
fqdn
[
fqdn-name
]
|
user-fqdn
[
user-fqdn-name
] }
By default, the IP address of the
interface to which the IPsec policy or
IPsec policy template is applied is
used as the IKE identity.
3.
(Optional.) Configure the
local device to always obtain
the identity information from
the local certificate for
signature authentication.
ike signature-identity
from-certificate
By default, the local end uses the
identity information specified by
local-identity
or
ike identity
for
signature authentication.
Configure this command when the
aggressive mode and signature
authentication are used and the
device interconnects with a Comware
5-based peer device. Comware 5
supports only DN for signature
authentication.
Содержание 10500 series
Страница 326: ...312 No duration limit for this SA ...
