Touch screen board and display cable
Description
Spare part number
Touch screen board (includes cable)
829930-001
Before removing the touch screen board, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off, turn the tablet on, and then shut it down
through the operating system.
2.
Disconnect the power from the tablet by unplugging the power adapter cord from the tablet.
3.
Disconnect all external devices from the tablet.
4.
Remove the back cover (see
Back cover on page 11
).
5.
Remove the battery (see
Battery on page 13
).
6.
Remove the speaker (see
Speaker on page 14
).
7.
Remove the rear-facing webcamera (see
Rear-facing webcamera on page 14
).
8.
Remove the antenna board (see
Antenna board on page 16
).
Remove the touch screen board:
1.
Release the ZIF connector (1), loosen cable from channels, and then remove the touch screen board (2)
without detaching the soldered connection.
2.
Disconnect the display cable (3) from the middle frame (4).
Reverse this procedure to install the touch screen board.
Touch screen board and display cable
17
Содержание 10 G2 2301
Страница 4: ...iv Safety warning notice ...
