HP Pavilion 17-cd0001, Руководство по техническому обслуживанию и ремонту

Страница: 61 / 86

Power button board
NOTE: The power button board spare part kit does not include the cable. The cable is available using spare
part number L56881-001.
Table 6-11 Power button board descriptions and part numbers
Description Spare part number
Power button board for use in ghost white models L56880-001
Power button board for use in acid green models L57168-001
Before removing the power button board, follow these steps:
1. Prepare the computer for disassembly ( Preparation for disassembly on page 27 ).
2. Remove the bottom cover (see Bottom cover on page 28 ).
3. Remove the battery (see Battery on page 35 ).
4. Remove the solid-state drive (see Solid-state drive and Optane Memory Module on page 30 ).
5. Remove the vent covers (see Vent covers on page 40 ).
6. Remove the fan shields (see Fan shields on page 42 ).
7. Remove the fan/heat sink (see Heat sink/fan assembly on page 43 ).
8. Remove the system board (see System board on page 48 ).
Remove the power button board:
1. Disconnect the cable from the ZIF connector on the power button board (1).
2. Remove the protective tape from the board (2).
3. Remove the two broad head Phillips M2.0 × 2.0 screws (3) that secure the board to the computer.
4. Remove the power button board from the computer (4).
Reverse this procedure to install the power button board.
Component replacement procedures 51