HP Compaq nc4000 - Notebook PC Скачать руководство пользователя

Страница: 73 / 101

External Devices

The jacks and connectors described in this guide support
standard external devices.

For information about which jack or connector to use, refer
to the documentation included with the device.

For information about installing or loading any software,
such as drivers, required by the device, refer to the
documentation included with the device.

To connect a standard external device to the notebook:

1. Turn off the notebook.

2. If you are connecting a powered device, turn off the device.

3. Connect the device to the connector on the notebook.

4. If you are connecting a powered device, plug the device

power cord into a grounded electrical outlet.

5. Turn on the device.

6. Turn on the notebook.

To disconnect a standard external device from the notebook, turn
off the device, then disconnect the device from the notebook.

Hardware Guide

7-1

Содержание nc4000 - Notebook PC






































































































Результаты поиска

Содержание nc4000 - Notebook PC

Отзывы:

Похожие инструкции для nc4000 - Notebook PC

Бренды по названию

Популярные бренды

HP Compaq nc4000 - Notebook PC, Руководство по оборудованию

Результаты поиска

Содержание nc4000 - Notebook PC

Отзывы:

Похожие инструкции для nc4000 - Notebook PC

Бренды по названию

Популярные бренды