Hozelock Green Power, Руководство пользователя

Страница: 3 / 6

GB
A Nozzle
B Main power module
C Stand
D On - Cooling - Off switch
E Air inlet vent
F Handle
G Hanging point
H
Power cable
Installation &
Operating Instructions
READ THESE INSTRUCTIONS CAREFULLY
BEFORE ATTEMPTING TO USE THIS PRODUCT.
FAILURE TO OBSERVE THE FOLLOWING
NOTICES MAY RESULT IN INJURY OR PRODUCT DAMAGE
KEEP THESE INSTRUCTIONS FOR FUTURE
REFERENCE.
THESE INSTRUCTIONS ARE ALSO AVAILABLE ON THE
HOZELOCK WEBSITE.
Important
• Do not use the GREEN POWER in any environment with risks
of explosion or near flammable materials.
• Do not use on extremely dry ground to prevent risk of fire.
• Do not point the hot air towards people or animals
• Do not point the hot air flow over the same area for an
extended period due to fire risk.
• Ensure the heat cannot spread to hidden flammable
materials, and ignite them.
• After use, lay the GREEN POWER on its stand (Fig.1 item C)
safely and leave it to cool down completely before storing it
away.
• Do not leave the GREEN POWER running unattended.
• Do not expose the GREEN POWER to rain or damp.
• Do not immerse the GREEN POWER in water or allow any
water to enter the product.
• Disconnect the GREEN POWER before storing it.
• Do not touch the hot nozzle (Fig.1 item A).
• Do not allow the electrical cable to touch the hot nozzle.
• Never obstruct the vents (Fig.1 item E).
• Do not use the electric cable to support or carry the
GREEN POWER.
• Do not attempt to open or modify the GREEN POWER,
there are no user serviceable parts.
• If you add an extension cable, it must be identical to
the electrical cable of the GREEN POWER with sealed
connecting plug.
• If the GREEN POWER is obviously damaged do not use it.
• If the electrical cable of the product becomes damaged do
not use the product and contact Hozelock Customer Service.
• The product is designed for private domestic use and
must be used in accordance with these instructions. It is
not designed or guaranteed against faults developing
when used in an industrial or commercial environment or
application.
• Children and teenagers below the age of 16 should not use
the GREEN POWER and must stand away when it is in use.
Children shall not play with the appliance. Cleaning and
user maintenance shall not be made by children without
supervision.
This product should not be used by persons
(including children) with impaired physical, sensory or
mental abilities, or lacking knowledge and experience,
without supervision by a person in charge of their safety,
instructing them on how to use the device.
Warning:
Safety & Electrical Connections
• This product is supplied with 3m of 2-core electric cable and
BS Plug fitted with a 13A fuse for UK market.
A 0.3m of 2-core electric cable and plug are fitted for
Australia. For connection to the mains supply use only
2-core cable (ref HO5 RN-F). This has a minimum copper
cross-section of 1mm
2
with Polycloroprene-Rubber
insulation.
• A 30mA maximum Residual Current Device (RCD) MUST be
fitted to the mains supply.
Start Up - First Use
Ensure the switch (D) is set to ‘OFF’ (Fig.2 item I).
UK:
Connect the GREENPOWER either directly to the power supply
or with an extension cable if necessary.
Australia & NZ:
Connect the GREEN POWER with an extension cable to the
power supply.
Hold the GREEN POWER by the handle and
(noting the above mentioned Safety Precautions) switch it on
to the “Heating” position (Fig.2 item J).
The device can take 45 seconds to reach operating
temperature.
To treat the weed, rest the nozzle on the ground placing
it directly above the weed and hold in that position for 3
seconds.
Weeds are killed by the thermal shock. The fast temperature
rise bursts the cells of the plant and destroys the weed.