Hozelock Green Power, Руководство пользователя

Страница: 4 / 6

Repeat this procedure to treat other weeds around the
garden.
Keep the electrical cable well away from the heated nozzle.
Cooling Cycle
Before switching off the device, a cooling phase is required.
If the cooling phase is not carried out, it may damage the
product over time.
Set the switch (D) to the “Cooling“ position (Fig.2 item K) for
at least 30 seconds.
After this time, move the switch to OFF (Fig.2 item I) to switch
off the GREEN POWER.
Storage
Disconnect the device from the power supply.
Check the device is completely cold before storing it.
It can then be stored horizontally on the ground on it stand
(Fig.1 item C) or hung to the wall by its anchoring point
(Fig.1 item G).
Maintenance
The product can be cleaned with a damp cloth and mild
detergent but do not allow any water to enter the product.
There are no user serviceable parts on the GREEN POWER.
For any queries, please contact Hozelock Customer Services
at the below address.
Disposal
Do not dispose of electrical appliances as unsorted municipal
waste, use separate collection facilities.
Contact your local government for information regarding
the collection systems available. If electrical appliances
are disposed of in landfills or dumps, hazardous substances
can leak into the groundwater and get into the food chain,
damaging your health and well-being. When replacing old
appliances with new ones, the retailer is legally obligated
to take back your old appliance for disposal at least free of
charge.
2 Year Guarantee
If this product, becomes unserviceable within 2 years of the
date of purchase it will be repaired or replaced at our option
free of charge, unless in our opinion it has been damaged or
misused.
Liability is not accepted for damage due to accident, improper
installation or use. Liability is limited to replacement of a
faulty GREEN POWER.
This guarantee is not transferable. It does not affect your
statutory rights. To obtain the benefits of the guarantee,
firstly contact Hozelock Customer Services who may request
that the product is sent along with proof of purchase directly
to the address below.
Troubleshooting
Incidents Causes Solutions
The device
does not
heat up.
No power
supply.
Check that the plug is
properly inserted into the
socket.
The switch
(D) is not in
the heating
position.
Check the fuse.
Set the switch (Fig.2 item I)
to the ‘heating’ position.
The plant
does not wilt.
The device is
not held close
enough to
the weed.
Apply the nozzle properly to
the weed while letting it rest
on the ground.
The
application
time is not
long enough.
The application time of the
nozzle on the weed may
take longer than 3 seconds.
If necessary, repeat the
application.
For any other issues, please call our Customer Services
department at the below address.
Technical Specifications
Power 1600 watt
Voltage 220V-240V 50Hz
Temperature at nozzle outlet,
approx.
600°C
Supply cable
(UK)
3m
H05 RNF
Supply cable
(Australia & NZ)
0.3m
H05 RNF
IP rating IPX0
Insulation class
Contact
For product advice please contact:
Hozelock Customer Services,
Hozelock Ltd., Midpoint Park, Birmingham. B76 1AB. England.
Tel: +44 (0) 121 313 1122
info@hozelock.com
www.hozelock.com