21
TEST PROGRAM
tESt
program can be used to check the correct function of the air flap. Use the
arrows to select a position of the air flap (
Po0, Po1, ..., Po5
). By pressing the
OK button the air flap turns to the selected position.
Po1
- fully open
Po5, Po0
- fully closed
Selecting the
End
value will quit the testing program and the combustion
control is ready to be used. The originally saved program is not changed by
using the test program.
Setting the communication channel – If there is another combustion control
nearby or other source interfering the communication, use the arrows to select
a different channel (
Ch-1, Ch-2, ..., Ch-9
) and confirm by pressing OK.
Saving the settings is confirmed by displaying
End
and the unit is ready for
use.
Po1
T
3
T
4
T
5
T
start
T
max
Po2
Po3
Po4
Po5
time
te
m
pe
ra
tu
re
5
COMBUSTION CURVE
4.1
4.2
It is possible to shorten / extend the active burning phase in the next step.
Selecting a different value changes the point, when the air flap closes
completely – active burning ends and the glowing phase of hot coal begins.
The default value is
EP 0
.
The values that can be set-up:
Values EP 1, 2, ... 6 extend the phase of active burning
Values EP -1,-2,...-6 shorten the phase of active burning
Press OK to confirm. Continue to step 5.
4.2
4.3
EN
