18
Chapter 2
D82012364 REV C 6/17/13
Place the vehicle on flat level surface free from traffic hazards with the emergency
brake on. Make sure there is a clear pathway to the lift and there are no obstructions
under the lift. Plug in power cord to the power wheelchair and lower lift, keeping
hands and feet away from the bottom of the platform.
Remove the tie down straps by releasing some of the tension on the tie down
release lever by turning the knob clockwise. Move the red lever to the release
position and loosen the tie down strap by pulling on it (see Figures 2I, 2J).
Unloading your power chair
How to unload the power chair from the lift
• Do not occupy the power chair while it is on the lift. The lift
is not intended for human transport
• Do not overextend the lift in the down position. Lower the
platform until it just touches the ground without lifting the
vehicle. The lift is not intended to lift the vehicle.
• Check for obstructions before attempting to lower the
platform.
• Check that your feet and hands are clear of the power chair
and platform while it is being lowered.
Figure 2I Left
Figure 2J Right
Red
Lever
Red Lever
HoverliftManual-RevC 3/18/14 12:10 PM Page 18
