Hoval UltraGas (35-650), Руководство по эксплуатации

Страница: 11 / 48

11
4 205 044 / 00
Observation
It is too cold
It is too warm
From now on, equal day and
night temperatures should be
maintained continuously
This evening, the heating
should remain on for longer
A larger amount of hot water
is required
From now on, hot water but no
heating is required
Suddenly, there is no heating
or hot water; it is cold.
The room temperature setpoint
requires frequent adjustments
because it is too cold or too
hot
Today, I will be absent for seve-
ral hours during the day
I am travelling for a short peri-
od of time (e.g. 3 days)
I will be travelling for an inde-
finite period of time
In summer, it is too cold or too
warm.
Remedy
Set a higher value for the room temperature with and
the rotary pushbutton (page 14).
Set a lower value for the room temperature with and
the rotary pushbutton (page 14).
Set the operating mode to “HEATING” with (page 16,
19).
Set the operating mode to “PARTY” with and set the
desired time (page 16, 18).
Press for 3 seconds and set the additional loading time
(page 29).
Set operating mode to “SUMMER” with (heating off, only
hot water) (page 16, 19).
Check the boiler controller for alarms and consult a heating
engineer, if necessary. Check main switch (see page 12) and
gas supply
Change the set heating curve (page 27, 28).
Changing the heating curve is not sensible if your system is fitted
with a room sensor (or room station) and an outdoor sensor.
The correct settings for the heating curve are then provided
automatically. Consult a specialist, if necessary.
Set the operating mode to “ABSENT TIL” with and set
the return time (page 16-18).
Set the operating mode to “HOLIDAY TIL” with and set
the return date (page 16-18).
Set the operating mode to “RED. HEATING” with .
When returning, set the operating mode to “AUTOMATIC” (page
16, 17, 19)
.
Indicates that the summer disconnection is active. Wenn
Ihnen If it is too cold, set the operating mode to “HEATING”
with (page 16, 19).
� � �
� � �
� � �
� � �
� � �
� � �
� � �
� � �
6.4.3 What to do if...
The following information can be used as a first level support in frequently
occurring situations.
6. Heating system control