Hoval TopVent TP, Руководство по эксплуатации

Страница: 41 / 48

Condensing unit
■ Install a leakage current protective circuit for the condensing unit power supply.
■ Install a main switch with auxiliary contact (NO contact, provided by the client)
in view of the condensing unit.
■ For units without heating for condensate drain pan:
– Connect the cable for the power supply to the main switch.
– From there, route it to the connection terminals of the condensing unit.
■ For units with heating for condensate drain pan:
– Connect the cable for the power supply to the main switch.
– From there, route it to the distributor terminals in the connection box for the
pan heating.
– Install a cable from these distributor terminals to the connection terminals of
the condensing unit.
■ Install the signal lines:
– TopVent ® communication (from TopVent ® unit control box to condensing unit)
– Fault reporting (from TopVent ® unit control box to main switch)
Heating for condensate drain pan
Observe the enclosed installation instructions from Daikin.
3 4
1
2
■
1
Power supply for condensing unit
■
2
Condensing unit main switch
■
3
Fault message
■
4
Communication TopVent ®
Fig. 38: Electrical installation of the condensing
unit
41
TopVent ® TP
Transport and installation
4 218 024-en-04