Hoval TopVent TP, Руководство по эксплуатации

Страница: 40 / 48

TopVent ® TP with supplementary heater (electric heating coil)
■ Connect the power supply:
– Open the access panel for the electric heating coil connection.
– Mount the cable feedthrough fastened inside it in the side wall.
– Insert the cable for the power supply and connect it directly to the main
switch and the PE terminal. Observe the clockwise rotating field.
1
2
3
5
4
6
8
8
10
7
9
12
11
14
13
■
1
Gas temperature sensor
■
2
Condensate pump (option)
■
3
Expansion valve
■
4
Differential pressure switch
■
5
Liquid temperature sensor
■
6
Actuator Air-Injector
■
7
Supply air temperature sensor
■
8
Unit control box
■
9
Communication module
■
10
Fan (signals, power supply)
■
11
Power supply for TopVent ®
■
12
Zone bus
■
13
Signal line for electric heating coil
■
14
Power supply for electric heating coil
Fig. 36: Cable routing for TopVent ® TP with elec-
tric heating coil (in this case with flat filter box)
TopVent ® TP with supplementary heater (hot water)
■ Wire up the mixing valve to the unit control box.
■ For mixing or injection system: Wire up the heating pump and heating valve to
the connection box.
■ If applicable, wire up the return temperature sensor to the unit control box.
1
2
3
5
4
6
8
9
7
10
11
12
■
1
Gas temperature sensor
■
2
Condensate pump (option)
■
3
Expansion valve
■
4
Temperature sensor air outlet suppl. heater
■
5
Liquid temperature sensor
■
6
Actuator Air-Injector
■
7
Supply air temperature sensor
■
8
Unit control box
■
9
Fan (signals, power supply)
■
10
Communication module
■
11
Power supply for TopVent
®
■
12
Zone bus
Fig. 37: Cable routing for TopVent ® TP with hot
water heating coil
40
TopVent ® TP
Transport and installation
4 218 024-en-04