20
Advanced User Instructions
430294ENG-Jun02
3 - Room Level
At this level, the parameters relevant to the
heating requirements of the building and its
characteristics can be displayed and changed.
-
Hot water temperature
-
Hot water operation
-
Burner hours run
-
Burner starts
-
Holiday program
-
Clock programs
-
Heating curves
-
Room temperature correction
-
Reset function
Entering the Room Level
Room level can be entered by using the
key. Changes can be made using the ,
and keys.
To exit the room level press the key at any
time.
Press and hold for 3 secs
Hot water
temperature
Works setting: 55ºC
Adjustment range 10ºC … Hot water maximum
temperature
press
to increase
to decrease
The maximum temperature is set in the technical
parameter level.
Hot water operation
Works setting: On
Adjustment range: On or Off
Change with keys or
On – Hot water control possible
Off – No Hot water control
Burner hours run
Works setting:
000000.00h
Range: 0 … 99999999
Number of burner
starts
Works setting:
00000000
Range: 0 … 99999999
Holiday program start
Adjust with to increase and to decrease
Change between day and month with and
This function is used to switch the heating to
frost protection only while the building is
unoccupied for example a holiday. The default
display will be today’s date.
Holiday program
finish
Adjust with to increase and to decrease
Change between day and month with and
This function is used to switch the heating back
on when the building becomes occupied.
Example of holiday program
The heating will be
switched to frost
protection only on the
29.3 at 24.00 hrs
The heating will
remain off from 30.3
00.00 hrs to 14.4
00.00 hrs. This will be
the default display until the heating is started
again on 14.4.
i
