14
Advanced User Instructions
430294ENG-Jun02
Block programming
In order to simplify the programming of the time clocks it is possible to copy the time clock settings in
various ways.
A – Complete automatic programs
It is possible to copy complete heating or hot water programs to other programs for example heating
program 1 to heating program 3. This can be achieved by using the key to enter the time clock and
then the keys to select the heating or hot water as the source. The key is used to select
the target program to which it is to be copied. The key is used to complete the copy. The procedure
is shown in further detail by the illustration below.
Note: It is not possible to copy heating programs to hot water programs or vice versa.
Use
or
to
change program no.
use to enter program
to be copied to
Copy will
appear
Press key to
confirm copy
OK appears to confirm
program copied
New source program for
further copying
Program will blink
*
* only if present
Source program
Source program
Boiler circuit
program 1
Target program
mixer circuit 2
program 2
Program copied
Target program
=
Source program
Copy program 3 from
program 1
Copy hot water prog. 3
from hot water prog. 2
Press to enter clock program
Program will blink
Heating circuit
