Hoval TopTronic E, Инструкция по эксплуатации

Страница: 12 / 26

4 214 174 V00 KDT GLT-Modul TTE_EN.docx 12 / 26
Parameters Designation Value Min. Max. Comments R W
02-067 SO/WI display 0 0 1 Summer/winter operation
display 4 7
20-009 Software version
expansion module 2
0
0 0 Software version expansion
module 2 0 7
20-019 Hardware version
expansion module 2 0 0 0 Hardware version expansion
module 2 0 7
20-203 Version_CommonLib 1.3.0 0 0 Library version 5 7
20-200 Version_VMLib
1.3.0
0 0 Library version 5 7
20-201 Version_L2Lib 1.3.0 0 0 Library version 5 7
20-202 Version_BSPLib 1.3.0 0 0 Library version 5 7
7. Function name
In the Function name menu, it is possible to assign a freely definable name in addition to the standard name of
each function. This is then transferred to the operator level (e.g. for operating mode selection). Both names are
displayed in the parameter level.
7.1. Function name menu
Parameter Designation Value Min. Max. Comment R W
04-005 Function name General 0 13 Function name 0 5
8. Configuration
In the Configuration menu, the controller can be reset to the factory settings, and a reference value increase or
reduction can be activated. In addition, it is possible to perform a factory reset under par. 04-045 (reset to factory
settings).
8.1. Configuration menu
Parameter Designation Value Min. Max. Comment R W
04-045 Commands
No action
Perform command
0 = No action
9 = Reset processor (like power off-on)
21 = Error unlocking
31 = Factory reset 0 5
20-027 Set IBN date 2036-02-06 0 0 Command set commissioning date 5 5
30-066 Alloc. heat/cool
sw. valve input
temp. 0=OFF Allocation heating/cooling switching input
Temperature request 3 3
30-070 Alloc. heating/
cooling sw. valve
input
0=OFF
Alloc. heating/cooling sw. valve input 3 3
30-054 Allocation
setpoint increase
input 0=OFF Allocation setpoint increase input
0=OFF, 1=AF, 2=SF, 3=VF1, 4=VE1, 5=VE2,
7=VE1-FE1, 8=VE2-FE1, 9=VE3-FE1,
10=FVT-T-FE1, 12=VE1-FE2, 13=VE2-FE2,
14=VE3-FE2, 15=FVT-T-FE2 3 3