37
4 211 325 / 00
HeaTIng sysTeM conTroL
4.10.5 Reloading the standard switching times program - Deleting your own time program
Follow the steps 1 to 3 described in
Chapter 4.9.3 “Domestic hot water
economy temperature”!
Tap the “push & turn button” to ac-
knowledge the selected value
The letters “HC” are shown flashing on
the display.
Select "Default times" by turning the
"push & turn button."
“Default-time” is shown flashing on the
display.
Tap the “push & turn button” to ac-
knowledge the selected value
The letters “HC” are shown flashing on
the display.
Select the desired heating circuit by
turning the “push & turn button.”
DEFAULT-TIME
TIMEPROGRAMS
HC
DEFAULT-TIME
HC
This function allows you to reset all val-
ues preset at the factory!
i
4
5
6
7
8
9
10
