Page 22 of 30
PNL18 LED Driver Calibrate:
If you install a new one’s digit panel, uninstall a one’s digit panel, or change the DR600
radar on a PNL18, it is recommended to recalibrate the LED driver controller. This is to
ensure optimal performance and power consumption.
Step 7
: Click the “Calibrate” button to initiate this process. The “Status” will show
“Done” upon the completion of a successful calibration.
Write the Configuration to the PNL18:
Step 8
: Write the Configuration to the PNL18 by clicking on the “Save Changes” button.
Step 8
Step 7
