Page 18 of 30
Setup The Display Limits (Permanent Location, Rotary Switch Disabled):
Step 3
: Setup the display limits for your permanent location.
The following screen shows the simplest option with the rotary switch disabled. We will
discuss the rotary switch in the next section.
Step 3A
: Disable the rotary switch if the sign will be in a permanent location and the
display limits will be fixed (skip to next section if sign will be portable unit).
Step 3B
: Set the Minimum display speed. Display will be blank below this speed.
Step 3C
: Set the Maximum display speed. Display will be blank above this speed.
Step 3D
: Set the Speed Limit. Display will flash above this speed to attract further
attention. Users may choose to set this slightly above the actual speed limit on the road to
prevent excessive flashing if traffic is moving just above the posted speed limit.
However, the end user is the best judge of this value.
Step 3D
Step 3C
Step 3A
Step 3B
