10
FIGURE 2
Night
Day
5 Sec
5 Min
SETTING UP FOR AUT
Once walk tests are complete, the u
The TIME setting controls how lo
activation and after all motion ce
clockwise) is approx. 5 seconds, w
is approximately 5 minutes. Set th
these limits.
The LUX control determines the lev
operating. The setting is best achie
1. Set the LUX control knob fully c
operating at dusk.
If you require the light to activate
reaches the level of darkness at whi
SLOWLY rotate the control in a cl
where the lamp illuminates. Leave
MANUAL OVERRIDE MODE
1. To switch into manual override t
2. To reset it back to auto mode,
before switching the power back
cycle before resuming normal o
10 & 20W sensor lights instructions_A6_Layout 1 13/10/2016 11:06 am Page 10
