Hottek HT-964-200, Руководство пользователя, Страница: 15 / 28

ENG
15
Hair Cut Recommendations
• Use short strokes only to work gradually over the entire head.
• Cutting hair requires practice so it is always better to leave the hair
longer for the first few haircuts until you become used to the length to
which each comb attachment cuts the hair.
Extra Combs
• Attachment comb 6.1 leaves 3 mm hair length.
• Attachment comb 6.2 leaves 6 mm hair length.
• Attachment comb 6.3 leaves 9 mm hair length.
• Attachment comb 6.4 leaves 12 mm hair length.
• To attach a comb, hold it with its teeth upward and side it onto and
along the clipper blade until the front of the comb firmly seats against
the clipper blade.
• When you use the clipper for the first time, cut only small portions of
hair until you are accustomed to the cutting length with a certain comb.
• For even cutting, allow the attachment comb to cut its way through
the hair.
• Do not force it through quickly.
• While cutting also remember to remove trimmed hair from time to time.
Preparation for Haircut
• Slightly com the hair.
• Remove the blade guard.
• Add a few drops of oil to the blades.
• Chose the attachment comb (6.1-6.4) depending on the desired hair
length and fix it.
• If you are doubtful of the hair length, start with the attachment comb
6.4 (12 mm).
• Plug in a 220-240V/50-60 Hz outlet and switch the device on.
• For even cutting, allow the hair clipper to cut its way through the hair
and using the same speed.
How to use
1 – Nape and neck
• Set 6.1 (3 mm) or 6.2 (6 mm) comb.
• Hold the hair clipper cutting edge up.