Hottek 125647, Руководство пользователя, Страница: 15 / 24

ENG
15
• Using the shorter attachment comb cut hair to taper the hair down to the
neckline. Comb the hair and check for uneven areas, and outline of sides
and neckline as described previously.
Warning!
The hair clipper can continuously operate for 10 minutes maximum. You can
continue operation after a 10-minute break.
Blade oiling
• The blades should be oiled before and after every haircut.
• Turn the appliance off using the On/Off switch (3).
• Apply one-two drops of oils at the blade’s teeth and back side of the top
blade and then switch the unit on and make sure it is running smoothly.
• Unplug the appliance and remove surplus oil with a dry cloth.
Cleaning and Maintenance
• Disconnect the device from power source.
• The blades should be cleaned from hair with brush supplied.
• Remove the blades and clean from hair remains.
• Wipe the body of the hair clipper and the accessories with wet cloth. Dry
the appliance.
• Do not use chemically active or abrasive detergents to clean the device.
Storage
• To store the appliance, thoroughly clean it.
• Store the appliance in a dry cool place out of reach of children.
• Electrical equipment have to be stored in a dry place at ambient temperature
no higher than plus 40 °C with a relative humidity of 70%, and the absence
of dust, acid and other fumes in surrounding medium which affect adversely
the materials of the electrical devices.
Utilization
After the end of the service life do not discard the unit with household waste.
Hand it at an official collection point for recycling. Doing it you will help protect
the environment.
The manufacturer preserves the right to change the design and the specifica
-
tions of the unit without a preliminary notification.
Unit operating life is 2 years