Hottek 125647, Руководство пользователя, Страница: 14 / 24

ENG
14
3 – Side of the head
• Switch the device off and set 6.1 or 6.2 (3 mm or 6 mm) comb depending on
the hair length and cut the temples.
• Set 6.3 or 6.4 (9 mm or 12 mm) comb and continue to cut hair to the top
of the hair.
4 – Top of the head
• Set 6.3 or 6.4 (9 mm or 12 mm) comb and start to cut top of the head.
• It is recommended to cut hair from back to front against the direction of
normal hair growth.
• You may also cut along the direction of normal hair growth.
• Please note that haircut against the direction of normal hair growth will be
shorter than those cut along the direction of normal hair growth.
• 6.1 or 6.2 (3 mm or 6 mm) combs are used to achieve a short haircut.
• Hold the hair between the finders and cut it to desired length.
• Use the barber comb to simplify the process.
• Cut over the barber comb and cut it.
• Changing the strand length, you will enjoy the desired haircut.
• Always start from back of the head.
• Comb out trimmed hair and check for uneven strands.
5 – Finishing touches
• Use the hair clipper without an attachment comb for close trimming around
the head.
• To get a clean line around the neck and temples, set the blade adjustment
level in the down position.
• Reverse the hair clipper.
• Press the hair clipper at a right angle to the head, tips of the blades lightly
touching the skin and cut the shortest hair.
• You may even the longer hair using a razor.
Short haircuts
• Starting with the longest attachment comb (12 mm) cut from the back of
the neck to the crown. Hold the attachment comb flat against the head and
slowly move the hair clipper through the hair.
• Cut the hair against their growth direction from the front to the top of the
head. Then cut the sides.
• To give a “flat top” look, the hair on the top of the head must be cut over the
top of a flat comb rather by using an attachment comb. Start the cut from
the top.