Hotpoint SI E40 BA1 UK, Руководство по эксплуатации

Страница: 8 / 16

88
en
If a 13 amp plug (BS 1363) is used it must be fitted
with a 13 amp fuse, either in the plug or adaptor or at
the distribution board.
If you are in any doubt regarding the electrical supply
to your machine, consult a qualified electrician before
use.
How to connect an alternative plug
The wires in this mains lead are coloured in accordan-
ce with the following code:
BLUE NEUTRAL (N)
BROWN LIVE (L)
GREEN & YELLOW EARTH (E)
Fuse
Blue
Brown
Cord
The power supply cable must never be bent
or dangerously compressed.
The power supply cable must only be repla-
ced by an authorised serviceman.
BEFORE USE
Before using the appliance for the first time, remove
all stickers, protective plastic or cardboard case from
the soleplate of the iron.
Make sure that all adhesive parts have been
removed from the soleplate with a dampened soft
cloth and eliminate any residues or particles from
the manufacturing process, by repeatedly filling and
emptying the water reservoir.
When switching on the iron for the first
time, you may notice an unpleasant odour, a
little smoke and some impurities that will
disappear in a few minutes. When using the steam
function for the first time, do not direct the steam
jet on the garments because of the possible
presence of manufacturing residues in the steam
dispenser.
Filling the water reservoir (A)
We recommend using demineralised water.
Replacing the fuse
When replacing a faulty fuse, a 13 amp ASTA appro-
ved fuse to BS 1362 should always be used, and the
fuse cover re-fitted. If the fuse cover is lost, the plug
must not be used until a replacement is obtained.
Replacement fuse covers
If a replacement fuse cover is fitted, it must be of the
correct colour as indicated by the coloured marking or
the colour that is embossed in words on the base of
the plug. Replacements can be obtained directly from
your nearest Service Depot.
Removing the plug
If your appliance has a non-rewireable moulded plug
and you should wish to re-route the mains cable throu-
gh partitions, units etc., please ensure that either:
• the plug is replaced by a fused 13 ampere rewi-
reable plug bearing the BSI mark of approval.
or:
• the mains cable is wired directly into a 13 amp
cable outlet, controlled by a switch, (in complian-
ce with BS 5733) which is accessible without
moving the appliance.
Disposing of the plug
Ensure that before disposing of the plug itself, you
make the pins unusable so that it cannot be acciden-
tally inserted into a socket.
Instructions for connecting cable to an
alternative plug
The wires in the mains lead are coloured in
accordance with the following code:
GREEN & YELLOW EARTH
BLUE NEUTRAL
BROWN LIVE
As the colours of the wires in the lead may not corre-
spond with the coloured markings identifying the ter-
minals in your plug, proceed as follows:
• Connect Green & Yellow wire to terminal marked
E or or coloured Green or Green & Yellow.
• Connect Brown wire to terminal marked L or co-
loured Red.
• Connect Blue wire to terminal marked N or co-
loured Black.