Hotpoint SI E40 BA1 UK, Руководство по эксплуатации

Страница: 15 / 16

15 15
en
• The soleplate temperature may be too low due to the excessively
frequent activation of the shot of steam button. Slightly increase the
interval between steam shots.
• The soleplate temperature is set to a too-low temperature.
• You have replaced the iron horizontally without emptying it and/or
without setting the steam regulator to Off.
• You did not close the lid of the filler hole correctly.
• You have used the shot of steam function with a too-low temperature.
We recommend to use these functions with temperatures higher
than .
• You are using perfume, vinegar, starch, vinegar, starch, scale-
removing agents, ironing products or other chemical substances.
Remember that these substances may damage the product. Rinse
the water reservoir.
• You are using a too-high temperature. Clean the soleplate (see
chapter “Cleaning and maintenance”, section “Cleaning”).
• You are using starch. You can use starch directly on the inside out of
the fabrics and in any case never in the water reservoir.
• The garment was not washed correctly or has some soap residues.
• You are ironing a new garment that was not washed for the first time.
• Not enough water in the water reservoir. Fill the water reservoir.
Water is dripping out of the
soleplate
The soleplate is dirty or dark
and may stain the fabrics.
The spray function does not
work.