Hotpoint GW32, Инструкция по эксплуатации

Страница: 14 / 24

Care and Cleaning
14
Clean the cooker regularly and wipe up spills soon after they occur
to prevent them from becoming burnt on. Never use biological
washing powder, caustic cleaners, harsh abrasives, scouring pads,
aerosol cleaners or oven chemical cleaners of any kind.
To move the cooker forward, open the grill door and with both hands
positioned under the roof of the compartment, lift and pull forward.
Replace by pushing the cooker backwards. Check that the cooker is
level. Take care to ensure that any floor covering is not damaged.
Do not attempt to lift the product using the grill door or grill door
handle.
Wipe over the door with a cloth wrung out in hot soapy water, then after
wiping with a cloth wrung out in clear water, dry with a soft clean cloth.
Take care during cleaning not to damage or distort the Door Seal. Do not
lift the Door Seal from the Oven Front Frame, if necessary remove the
seal by carefully unhooking the corner clips.
Do not use scouring pads or abrasive powder which may scratch the
surface.
The door inner glass panel can be removed for cleaning the inside
surfaces of the door.
GRILL DOOR:
1. Open the door fully.
2. Remove the left hand door top trim by pressing the release button
that is situated between the inner and outer glass panels, at the top
of the door.
3. Repeat the procedure for the right hand door top trim.
4. Remove the inner glass panel taking care that the door does not
slam shut because of the reduction in door weight.
5. When replacing the door inner glass panel, ensure that it is held in
place by the top and bottom door trims so that it cannot fall out and
that the printing on the glass is readable from the face nearest to the
oven.
Door trim moulding release buttons
OVEN DOOR:
1. Open the door fully through 180˚.
2. Remove the left hand door top trim by pressing the release button
that is situated between the inner and outer glass panels, at the top
of the door.
3. While holding the weight of the inner glass panel, repeat the
procedure for the right hand door top trim.
4. When replacing the door inner glass panel, ensure that it is held in
place by the top and bottom door trims so that it cannot fall out and
that the printing on the glass is readable from the face nearest to the
oven.
NEVER OPERATE THE COOKER WITHOUT THE DOOR INNER GLASS IN
POSITION.
Oven Door /
Grill Door