background image

6

GB

REMOVING  THE  CRISPER  COVER

First Step : 

Removing the crispers

•  It  is  easy  to  pull  out  the  crisper  because  of  the

crisper has rollers.

• Pull the crisper out as far as possible and pull the

front part up and out

Second Step : 

Taking out the Partition Crisper Center

between the crispers.

•  Bend  the  Partition  toward  left  from  the  bottom  of

the  part

• Take out the Partition crisper

Third Step: 

Taking out  the crisper cover

• Pull out the crisper cover until the nails of the cover

come  on  the  cavities  (right  and  left  side)  of  the
cabinet.

• When the nails comes into the cavities pull up and

take out the crisper cover

RESETTING  THE  CRISPER  COVER

First Step : 

Settle the crisper cover

•  Put  the  crisper  cover  on  its  place  fitting  the  nails

and the cavities on the cabinet..

• Then push forward the crisper cover until it fits on

its  place.

Second Step : 

Placing the Partition Crisper centre

•  Place  the  Partition  on  its  cavities  placed  on  the

bottom of the cabinet and on the wall of the crisper
housing like shown in the figure

Third Step: 

Settling the crispers

• Put on the crisper on its rolls on its places..

• Push forward.

Crisper

Crisper  cover

Partition  Crisper

Partition Crisper centre

Crisper  cover

Crisper

Содержание Electronic No-Frost Refrigerator













Отзывы: