Hotpoint Electronic No-Frost Refrigerator, Инструкция по эксплуатации

Страница: 4 / 12

3
GB
Installation and Switching On The Appliance
• This appliance is connecting to 220-240V and 50
Hz.
• You can offer help from the service to install and
switching on the appliance without any cost.
• Before making the connection to the power supply,
ensure that the voltage on the nameplate
corresponds to the voltage of electrical system in
your home.
• If the socket does not match the refrigerator plug,
replace the plug with a suitable one (at least 16 A)
• Insert the plug into a socket with an efficient ground
connection. If the socket has no ground contact,
we suggest you call an electrician for assistance.
• Manufacturer is not responsible for failure to
complete the ground connection as described
in this booklet.
• Do not place the appliance
in direct sunlight.
• Do not use in open air and
shall not be exposed to the
rain.
• Place the refrigerator far
from heat sources and in a
well-ventilated position. The
refrigerator should be at
least 50 cm from radiators,
gas or coal stoves and 5 cm
far from electrical stoves.
• Keep the top free for at least
15 cm.
• Do not place heavy and lots
of things on the appliance.
• If the appliance is installed
next to another refrigerator
or freezer, obser ve a
minimum distance of 2 cm
to prevent condensation.
• The appliance must be stand firmly and level on
the floor Use the two front levelling-feet to
compensate for an even floor.
• In order to have air circulation under the appliance,
the space under the appliance must be open. Don’t
close it with carpet , etc.
• The outside of the appliance and the accessories
inside should be cleaned with a solution of water
and liquid soap; the inside of the appliance with
sodium bicarbonate dissolved in lukewarm water.
After drying replace all the accessories.
Before Switching On
• Wait after 3 hours before plugging
the appliance in to the main power
to ensure proper performance.
• There can be an odour when you first switch on the
appliance. It will disappear after the appliance starts
to cool.