Hotpoint CSX24X, Инструкция по использованию и уходу

Страница: 7 / 24

How to Set the
Door Alarm
don’t have to set the visual
alarm. As either is
the red DOOR OPEN
light flashes.
If
the green signal light on the
DOOR ALARM pad is glowing,
the beeper alarm is set. it’s not,
the to
turn it
either is open than
recurring beep sounds.
light goes out the beeping
stops when you the
There are times when you’ll want
the Door Alarm beeper turned
off.
When rearranging
example. Just the
pad. The light will out
the beeping will stop.
Deactivating the Door Alarm
beeper does not turn the
DOOR
OPEN light keeps flashing
until the door is closed.
Why the Red Warm
Temperature Light G1
OWS
At first, it’s probably because your
newly installed refrigerator hasn’t
completely
yet. Wait
hours for it coo],
the I will go out.
From then on, the red will
glow whenever temperatures
get
high
If this happens, open the
only when absolutely necessary,
them quickly
possible.
As soon inside temperatures
return to normal, the I
goes out.
7
How the Solid State
Monitor System
The word NORMAL is lighted
in green except when failure has
been detected.
The STATUS CHECK-RESET pad
has two functions:
1. You can touch the
STATUS
CHECK-RESET pad and get a
review of the electronic diagnostic
codes in order of their priority.
2. You can touch
the STATUS
CHECK-RESET pad to erase three
flashing codes immediately. Two
codes (DE and cannot be erased
the condition that caused them
to flash has been corrected (see
page 8).
(continued next page)