Hotpoint CSX24X, Инструкция по использованию и уходу

Страница: 6 / 24

Solid State Monitor System
It keeps an eye on
things for you.
@Red signal light flashes to tell
when either door is open.
@Green signal light tells
the Door Alarm beeper has been
set to sound after either door has
been open 30 seconds.
@Red signal light tells you when
freezer temperature is
above normal.
@Green lighted word NORMAL
indicates that no failure has been
detected by the diagnostic system.
in the
display warn you when:
❑
frozen foods should be
checked.
m
power has been interrupted.
❑
may not be operating
properly.
❑
-
defrost system has failed.
❑
freezer control may need to be
set for a
colder temperature.
What these mean—and
what to do when they appear—is
summarized on the inside of the
freezer compartment
explained more thoroughly on
the following pages.
Status Check pad puts a review
of the electronic diagnosis of five
coded functions at your fingertip
and also allows you to erase codes
from display.
Electronic control allows you
to turn night light in water-and-ice
service on and off.
When your refrigerator
is
plugged in.. .
panel lights come on for five
seconds, a beep sounds, and lights
off except as follows:
●
in the display. Touch
STATUS CHECK-RESET pad to
erase it.
●
Green word NORMAL
●
Red WARM TEMPERATURE
light glows if freezer compartment
temperature is higher than normal.
It goes off when proper
temperature is reached.
●
Door alarm beeper is activated
and green on DOOR ALARM
pad glows.
●
Red DOOR OPEN I flashes if
either door is open, goes out when
doors are shut.
. Night light in water-and-ice
service is off.