Hotpoint CG64SG1 UA/HA, Руководство по эксплуатации

Страница: 9 / 44

GB
9
*
Only available in certain models.
! If the flame is accidentally extinguished, switch off the
burner and wait for at least 1 minute before attempting
to relight the oven.
Adjusting the temperature
To set the desired cooking temperature, turn the
OVEN control knob in an anticlockwise direction.
Temperatures are displayed on the control panel and
may vary between MIN (150°C) and MAX (250°C).
Once the set temperature has been reached, the oven
will keep it constant by using its thermostat.
!
If the flame is accidentally extinguished, switch off the
burner and wait for at least 1 minute before attempting
to relight the grill.
Turnspit
To operate the rotisserie (
see diagram
) proceed as
follows:
1. Place the dripping pan in position 1.
2. Place the rotisserie support in position 4 and insert
the spit in the hole provided on the back panel of the
oven.
3. Acitvate the function
by pressing the
TURNSPIT button.
Oven light
The light may be
switched on at any
moment by pressing the
OVEN LIGHT button.
Timer*
To activate the Timer proceed as follows:
1. Turn the TIMER knob in a clockwise direction

for
almost one complete revolution to set the buzzer.
2. Turn the TIMER knob in an anticlockwise direction

to set the desired length of time.
Electronic timer*
This function displays the time and works as a timer
which counts down to zero.
! All functions will be implemented approximately 7
seconds after they have been set.
Resetting the clock
After the appliance has been connected to the power
supply, or after a power cut, the clock display will
begin to blink, showing the figure: 0:00
• Press button

and then buttons
-
and
+
to set the
exact time. Press and hold the buttons to quicken
the count upwards.
Any necessary modifications can be made by
repeating the above process.
Timer feature
This function may be accessed by pressing the

button, after which the display will show the symbol

. Every time the
+
button is pressed it corresponds
to a time increase of 10 seconds, until it reaches 99
minutes and 50 seconds. After this point, each press of
the button represents an increase of one minute, up to
a maximum of 10 hours.
Pressing the
-
button reduces the time.
After the time period has been set, the timer will begin
to count down. When the timer reaches zero, the
buzzer will sound (this may be stopped by pressing
any button).
The time may be displayed by pressing the

button,
and the

symbol indicates that the timer function has
been set. After approximately 7 seconds, the display
will automatically revert to the timer.
Cancelling a time that has already been set
Press the
–
button until the display shows 0:00.
Adjusting the buzzer volume
After selecting and confirming the clock settings, use
the
–
button to adjust the volume of the alarm buzzer.