background image

4

GB

As the colours of the wires in the lead may not 

correspond with the coloured markings iden-

tifying the terminals in your plug, proceed as 

follows:

Connect Green & Yellow wire to terminal 

marked 

E

 or   or coloured Green or Green & 

Yellow.

Connect Brown wire to terminal marked 

L

 or 

coloured Red.

Connect Blue wire to terminal marked 

N

 or 

coloured Black.

If a 13 amp plug (BS 1363) is used it must be 

fitted with a 

13 amp fuse, either in the plug or adaptor or 

at the distribution board.

If you are in any doubt regarding the electrical 

supply to your machine, consult a qualified 

electrician before use.

How to connect an alternative plug:

The wires in this mains lead are coloured in 

accordance with the following code:

BLUE  

 

 

NEUTRAL (N)

BROWN 

 

 

LIVE (L)

GREEN & YELLOW 

EARTH (E)

Disposing of the appliance:

When disposing of the appliance please remove 

the plug by cutting the mains cable as close as 

possible to the plug body and dispose of it as 

described above. 

!

 The washing machine should not be installed 

in an outdoor environment, not even where 

the area is sheltered, because it may be very 

dangerous to leave it exposed to damp, rain 

and thunderstorms.

!

 When the washing machine is installed, the 

mains socket must be within easy reach. 

!

 Do not use extensions or multiple sockets.

!

 The  power supply cable must never be bent 

or dangerously compressed.

!

 The power supply cable must only be repla-

ced by an authorised serviceman.

Warning! The company denies all liability if and 

when these norms are not respected.

The first wash cycle

Once the appliance has been installed, and 

before you use it for the first time, run a wash 

cycle with detergent and no laundry, using the 

wash cycle 

 

 (60°

(1st press of the button).

GREEN &
YELLOW

BROWN

BLUE

13 ampere fuse

CROSS-BAR
CORD GRIP

Technical data

Model

BHWMED 149

Dimensions

width 59.5 cm

height 81.5 cm

depth 54.5 cm

Capacity

from 1 to 7 kg 

Electrical 

connections

please refer to the technical 

data plate fixed to the ma-

chine

Water con-

nections

maximum pressure  

1 MPa (10 bar)

minimum pressure  

0.05 MPa (0.5 bar)

drum capacity 52 litres

Spin speed

up to 1400 rotations per 

minute

Test wash 

cycles in 

accordan-

ce with 

directives 

1061/2010 

and 

1015/2010  

programme 

 (60°) 

(

1st press of the button)

Standard Cotton 60°

.

programme 

 (40°) 

(

2nd press of the button)

Standard Cotton 40°

.

This appliance conforms to 

the following EC Directives:

- 2004/108/EC (Electromagne-

tic Compatibility)

- 2006/95/EC (Low Voltage)

- 2012/19/EU

Содержание BHWMD 742





















Отзывы: