Hotpoint AQUALTIS AQLF9D 69 U Instructions for and use, Инструкция по установке и эксплуатации, Страница: 9 / 80

EN
9
Wash cycles and options
Wash options
Super Wash
This option offers a high-
performance wash due to
the greater quantity of water
used in the initial phase of
the cycle, and due to the
increased wash cycle
duration, is particularly useful
for the removal of stubborn
stains. It can be used
with
or without bleach. When
dosing the bleach, be
careful not to exceed the
" max " level (see figure).
To bleach laundry without carrying out a full wash
cycle
, pour the bleach into the compartment 3 , select
the "Rinse" cycle and activate the "Super Wash"
option .
It cannot be used in conjunction with
, , , , ,
, , .
Easy Iron
By selecting this option, the wash and spin cycles will be
modified in order to reduce the formation of creases.
At the end of the cycle the washing machine
drum will rotate slowly
; the “Easy Iron” and START/
PAUSE indicator lights will flash. To end the cycle press
the START/PAUSE button or the “Easy Iron” button.
For the
Silk wash cycle, the machine will end the
cycle while the laundry is soaking and the “Easy
Iron” indicator light will flash. To drain the water so that
the laundry may be removed, press the START/PAUSE
button or the “Easy Iron” button.
It cannot be used in conjunction with
, , , , .
Time Saver
If you select this option, the wash cycle duration will be
reduced by 30%-50%, depending on the selected cycle,
thereby guaranteeing simultaneous water and energy
saving. Use this cycle for lightly soiled garments.
It cannot be used in conjunction with
, , , ,
, , , , .
Extra rinse
By selecting this option, the efficiency of the rinse is
increased and optimal residual detergent removal is
guaranteed. It is particularly useful for skin which is
sensitive to detergents. We recommend this option is
used with a full load of washing, or when a large amount
of detergent is required.
It cannot be used in conjunction with
, , .
(*) Note: 10 minutes after the START, the machine will recalculate the time remaining until the end of the wash cycle on the basis of the load inside it; this
value will then be shown on the display.
Table of wash cycles
For all Test Institutes:
1) Test wash cycle in compliance with regulation EN 60456: set wash cycle
with a temperature of 60°C.
2) Long wash cycle for cottons: set wash cycle with a temperature of 40°C.
3) Short wash cycle for cottons: set wash cycle with a temperature of 40°C.
Icon Description of the wash cycle
Max.
temp.
(°C)
Max.
speed
(rpm)
Detergent and additives
Max.
load
(kg)
Cycle
duration
Detergent
for wash
Fabric
softener
Bleach
Cottons wash cycles
Cottons
with pre-wash
(Add detergent to the relevant compartment).
90° 1600
l l
- 9
Cottons (1):
heavily soiled whites and resistant colours.
60°
(Max. 90°)
1600
l l l
9
Cottons (2): heavily soiled whites and delicate colours.
40° 1600 l l l 9
Coloured Cottons (3) 40° 1600
l l l
9
Shirts 40° 600
l l l
2
Jeans 40° 800
l l
- 4
Special programmes
Baby: heavily soiled delicate colours
40° 800 l l l 4
Durable
Synthetics
60° 800 l l l 4
Delicate Synthetics 40° 800
l l l
4
"Bed & Bath" for bedlinen and towels. 60° 1600
l l l
9
Duvets: for down-stuffed garments. 30° 1200
l l
- 3,5
Silk: for garments in silk and viscose, lingerie. 30° 0 l l - 2
Wool: for wool, cashmere, etc.
40° 600 l l - 2
Mix 30': to refresh lightly soiled garments quickly (not suitable for
wool, silk and clothes which require washing by hand)
30° 800
l l
- 3,5
Partials wash cycles
Rinse - 1600 - l l 9
Spin - 1600 - - - 9
Drain - 0 - - - 9
(*
)
T
h
e
d
u
rat
io
n
o
f
th
e
w
as
h
cy
cl
es
can
b
e
ch
ecked
o
n
t
h
e
d
is
p
lay
.
3
1
2