12
it
en
Power function
In order to select the power intensity you can:
•
Either press the + (14) or – (15) buttons
•
Or select it thanks to the slider, by swiping your
finger from left to right on the button.
To guide you, lights appear above each temperature
level.
Using different functions
Timer
To use the timer, press the timer button (9). The digital
screen will indicate « 0 : 00 ». During the next 4 secon-
ds, press on the +/- pads to adjust the cooking time.
Each pressure increases or decreases the time of 1
minute. If you maintain the button longer, the time will
increase or decrease by increments of 10 minutes. The
timer can be set from 1 minute to 180 minutes. Once
the time is set, the digital screen will flicker during 5
seconds before heating. To cancel the timer function,
press again on the timer button (9).
Keep warm mode
When the appliance is in operation, press on the Keep
warm button (7) if you want to keep warm your prepara-
tion. The appliance will set automatically on the lowest
power and will stop after 120 minutes. To set again the
power, press directly on the +/- buttons.
Simmer mode
To use this mode, press on the Simmer button (8). A
lamp lights up. The simmer cooker entering the simmer
state, the default power level shall be level 2. Under
this mode, the power cannot be adjusted. When press
ing“+” or “-“ or slider again, the induction cooker will
enter in the power state.
Fry mode
To use this mode, press on the Fry button (10). A lamp
lights up. The default power level shall be level 6. After
2 min the product is positioned at 4. This power fun-
ction to a maximum duration of 120 minutes. When
pressing “+” or “-“ or slider again, the induction cooker
will enter in the power state.
Boil mode
Boil mode is for boiling water. To use it, press on the
Boil button (11). A lamp lights up. The default power
level shall be level 10. After about 7 minutes, it will turn
to 8 level power. In this mode, the default working time
is 15 minutes.
It is recommended to put water that occupies
30% to 80% of the pot capacity when boiling wa-
ter.
Boost mode
The boost button (12) allows obtaining directly the hi-
ghest power level. By pressing again the boost button
(12) the appliance will go back to the power level 5.
Child lock mode
To lock the control pads during cooking, press on Child
lock button (16).The indicator «Loc» will appear on the
screen. In this case, only the On/Standby button (13)
can be used to switch off the appliance. To unlock the
control panel, press again on “lock” button for 3 secon-
ds.
Switch off the appliance
After use, the electric hob is hot, the buzzer rings and
the indicator « H » flashes on the screen. To switch off
the appliance, press on the On/Standby button (13),
then unplug the socket.
Please, refer below table for wattage:
LEVEL
POWER (W)
1
120
2
300
3
500
4
800
5
1000
6
1200
7
1400
8
1600
9
1800
10
2000
CLEANING AND MAINTENANCE
Cleaning the induction cooker
Switch off and unplug the appliance. Let it cool down
before cleaning.
Regarding the glass-ceramic and the control panel:
•
Light dirt: clean with a soft wet cloth.
•
Oily dirt: clean with a soft wet cloth dipped with
little toothpaste or neutral detergent until the re-
moval of residuals.
During the cleaning, never clean the surface of
the induction cooker with a rigid brush.
Regarding the air entry and the air vent
After a long time of use, some dust or other dirt may
be accumulated at the air entry or air vent. Use a fle
-
xible brush or a detergent to clean it. The body of the
