20
GB
Switching the appliance off
During cleaning and maintenance it is necessary to
disconnect the appliance from the electricity supply:
1. Hold the ON/OFF button down for more than two
seconds until OFF appears on both indicator displays
(refrigerator and freezer).
2. Pull the plug out of the socket.
!
If this procedure is not followed, the alarm may sound.
This alarm does not indicate a malfunction. To restore
normal operation, hold the ON/OFF button down for
more than two seconds. To disconnect the appliance,
follow points 1 and 2 above.
Cleaning the appliance
The external and internal parts and the rubber seals
may be cleaned using a sponge that has been soaked
in lukewarm water and bicarbonate of soda or neutral
soap. Do not use solvents, abrasive products, bleach
or ammonia.
The removable accessories may be soaked in warm
soapy water or dishwashing liquid. Rinse and dry them
carefully.
The back of the appliance may collect dust. This can
be removed by carefully using the hose of a vacuum
cleaner set on medium power. The appliance must be
switched off and the plug disconnected from the
electricity mains before it is cleaned.
Avoiding mould and unpleasant odours
The appliance is manufactured with hygienic, odour
free materials. Food should be wrapped well and
containers closed properly in order to maintain this
hygiene. This will also prevent the formation of stains.
If you wish to switch the appliance off for an extended
period of time, clean the inside and leave the doors
open.
Maintenance and care
Replacing the light bulb
To replace the light bulb in the refrigerator compartment,
disconnect the plug from the electricity mains.
Access the light bulb as shown
(
see diagram
) and replace it with
a similar light bulb, the power of
which should not exceed 10 W.
All manuals and user guides at all-guides.com