Hotpoint Ariston NMBT 1911 Series, Руководство по эксплуатации

Страница: 17 / 40

GB
17
ICE CARE tray
The fact that they are situated on the top part of the freezer
drawers ensures greater cleanliness: the ice no longer comes
into contact with the food placed inside the freezer compartment;
furthermore, the dripping of the water during filling is avoided (a
lid to cover up the hole after filling with water is also provided).
1. Pull out the tray by pushing it up.
Check that the tray is ompletely empty and fill it with water
through the opening provided.
2. Take care not to exceed the level indicated (MAX WATER
LEVEL). Excess water prevents the ice cubes from dispensing
(if this happens, wait for the ice to melt and empty the tray).
3. Turn the tray 90°: due to the connected compartments each
mould fills with water ( see diagram ).
4. Close the opening with the lid provided and put the tray back.
5. When the ice has formed (minimum time approximately 8
hours) knock the tray against a hard surface and wet the
outside so that the ice cubes come loose and take them out
through the opening.
WATER LEVEL
MAX
W
A
TER LEVEL
MAX
W
A
TER LEVEL
MAX
Start-up and use
Starting the appliance
!
After transportation of the appliance, carefully place it in an
upright position and wait at least 3 hours before connecting it to
the electricity mains, to make sure it operates as it should.
• Clean the inside of the refrigerator well using warm water and
bicarbonate of soda before placing food inside it.
• The appliance comes with a motor protection control system
which makes the compressor start approximately 8 minutes
after being switched on. The compressor also starts each
time the power supply is cut off whether voluntarily or
involuntarily (blackout).
Freezer Compartment
When the product is switched on (the
ON/OFF
button is pressed
for more than two seconds) the freezer compartment is set to its
default value of
-18°C
. We recommend that the
SUPER FREEZE
function is set (the freezer display shows the text “SF”) in order to
accelerate the cooling process of the compartment; when the
inside of the compartment has reached its optimal temperature the
function will be deactivated and the food may be placed inside.
Refrigerator Compartment
When the appliance is switched on the refrigerator compartment
is set to its default value of
+5°C
. We recommend that the
SUPER COOL
function is set (the refrigerator display shows the
text “SC”) in order to accelerate the cooling process of the
compartment. After a few hours it will be cool enough for food to
be placed inside.
Navigating the display
Setting the temperatures:
If the product is switched on, the refrigerator and freezer
displays will indicate the temperatures set at that moment. To
change them, simply press the + and - buttons corresponding to
the compartment for which you wish to change the set
temperature. To be specific, each time one of the buttons is
pressed the temperature is increased or decreased by 1°, and
the number of illuminated horizontal bars is adjusted accordingly.
The temperature values that may be selected for the refrigerator
compartment are +8°C, +7°C, +6°C, +5°C, +4°C, +3°C and
+2°C, while the values that may be set for the freezer are -18°C, -
19°C, -120°C, -21°C, -22°C, -24°C and -26°C.
The temperatures are automatically set to
+5°C
for the
refrigerator compartment and
-18°C
for the freezer compartment
(these are standard food storage values).
When the “
I Care
” function is active, the appliance automatically
adjusts the temperatures according to the conditions inside and
outside the refrigerator; the operation of this function is signalled
by the text “
AUTO
”.
Whenever it is necessary to activate the “
I Care
” function at
temperatures that are different to the standard storage values,
the “
I Care
” button must be pressed as soon as the function is
activated and held down while the new temperatures are set
using the + and - buttons. Under these conditions, the
temperatures may be set to 4°C, 5°C and 6°C for the refrigerator
compartment and -18°C, -19°C and -20°C for the freezer
compartment.
When the
HOLIDAY
function is active the temperature may not
be adjusted, however the appliance adjusts itself automatically
so that the optimal settings for the situation are used:
+12°C
for
the refrigerator compartment and
-18°C
for the freezer
compartment. This function is indicated by the text.
To activate and deactivate the functions simply press the relevant
button and the function status will be signalled by the
corresponding LED switching on or off.
Several functions (
SUPER COOL, SUPER FREEZE, ICE
PARTY, I CARE
) are incompatible with others (
HOLIDAY
,...);
remember that there is a pre-set order of priority which will help
you to use the product in the best possible way.
When the Ice Party function has finished, press the
ICE PARTY
button to stop the relevant
LED
from flashing. This flashing
indicates that the function is complete and that the bottle should
be removed from the freezer compartment.
Child Lock
To enable the Child Lock function, the ALARM button must be
pressed for 2 seconds; the button lock activation is confirmed by
a short beep and the text “LO” “CH” appears on the refrigerator
and freezer displays. This text is then replaced by the refrigerator
and freezer temperatures set prior to when the child lock function
was enabled.
To deactivate the function, press the ALARM button or 2
seconds; deactivation will be confirmed by a short beep and the
text “CH” “OF” will appear on the refrigerator and freezer
displays for 1 second.