9
GB
Wash cycles and options
Wash options
!
If the selected option is not compatible with the set
wash cycle, the indicator light will flash and the option will
not be activated.
!
If the selected option is not compatible with a previously
selected one, the indicator light corresponding to the first
function selected will flash and only the second option will be
activated; the indicator light for the option which has been
activated will be illuminated.
Extra Rinse
By selecting this option, the efficiency of the rinse is
increased and optimal detergent removal is guaranteed. It
is particularly useful for sensitive skin.
Table of programmes and wash cycles
W
ash cycles
Description of the wash cycle
Max.
temp.
(°C)
Max.
speed
(rpm)
Detergents
Max. load (kg)
Residual dam-
pness%
Energy con- sumptionkWh
Total water lt
Cycle duration
Pr
ewash
W
ash
Bleach
Fabric
softener
CLEAN Plus
1
Anti Stain
40°
1400
-
4
-
-
-
180’
2
Anti Stain Quick
40°
1200
-
-
3,5 -
-
-
60’
3
Whites
60°
1400
-
4
-
-
-
180’
4
Cotton Standard 60°C
(1):
heavily soiled whites and resistant colours.
60°
(Max. 90°)
1400
(3)
7
53 0.94 52.5 160’
5
Cotton Standard 40°C
(2):
lightly soiled resistant and delicate colours.
40°
1400
-
7
53 0.93 77 140’
6
Synthetics:
heavily soiled resistant colours.
60°
800
3,5 44 0.93 47 115’
6
Synthetics (4):
lightly soiled resistant colours.
40°
800
3,5 44 0.57 46 100’
SPECIALS
7
Anti allergy Plus
60°
1400
-
4
-
-
-
195’
8
Anti allergy Delicate
40°
1400
-
4
-
-
-
195’
9
Wool:
for wool, cashmere, etc.
40°
800
-
-
1,5
-
-
-
70’
10
Delicates
30°
0
-
-
1
-
-
-
80’
ECO
11
Cotton Standard 20°C:
lightly soiled resistant and delicate colours.
20°
1400
-
7
-
-
-
170’
12
Eco Cottons
Cold Water 1400
-
-
7
53 0.17 63
80’
13
Eco Synthetics
Cold Water
800
-
-
3
48 0.07 30
70’
14
Eco Fast 30’
Cold Water
800
-
-
3
71 0.04 34
30’
Partial Programmes
Rinse
-
1400
-
-
-
7
-
-
-
36’
Spin and Pump out
-
1400
-
-
-
-
7
-
-
-
10’
Drain only *
-
OFF
-
-
-
-
7
-
-
-
3’
1) Test wash cycle in compliance with directive 1061/2010: set wash cycle 4 with a temperature of 60°C.
This cycle is designed for cotton loads with a normal soil level and is the most efficient in terms of both electricity and water consumption; it should be used for garments which can be washed at
60°C . The actual washing temperature may differ from the indicated value.
2) Test wash cycle in compliance with directive 1061/2010: set wash cycle 5 with a temperature of 40°C.
This cycle is designed for cotton loads with a normal soil level and is the most efficient in terms of both electricity and water consumption; it should be used for garments which can be washed at
40°C . The actual washing temperature may differ from the indicated value.
3) At 60 °C the “Prewash” function cannot be selected.
For all Test Institutes:
2) Long wash cycle for cottons: set wash cycle 5 with a temperature of 40°C.
4) Long wash cycle for synthetics: set wash cycle 6 with a temperature of 40°C.
Prewash
If this function is selected, the pre-wash cycle will run; this
is useful for removing stubborn stains.
N.B.:
Put the detergent in the relevant compartment.
* If you select programme
and exclude the spin cycle, the machine will drain only.
The length of cycle shown on the display or in this booklet is an estimation only and is calculated assuming standard working conditions. The actual duration can vary accor-
ding to factors such as water temperature and pressure, the amount of detergent used, the amount and type of load inserted, load balancing and any wash options selected.
