13 of 36
Indesit
Company
Service Manual UK
English
COMPONENT DESCRIPTION
Door
The Aqualtis Tumble Dryer door holds the customer interface controls and the water container
handle is only visible when the door is opened.
Filters
Two Plastic mesh filters are fitted,
1. Just inside the door, into the Front Air Duct
2. With the plinth open, the filter is located behind the cover.
See also page 7.
Control Module
This is an electronic device that monitors and controls all devices within the appliance. It is located
behind the right-hand Side Panel.
A production Control Module is pre-programmed at the factory.
Drum
The drum comprises of a zinc coated front and rear body and two removable plastic lifters. The rear
of the drum is perforated to allow the passage of air. Fixed to the rear pressing is a support shaft which
runs in a bearing located in the rear panel of the dryer.
Door Switch
A single unit comprising two single microswitches, fitted to
the front panel of the dryer.
- One microswitch signals to the module whether the door is
opened or closed.
- One microswitch disconnects supply to the motor
whenever the door is open.
Pull on Handle
Heat Exchanger
Filter Unit
(cover open)
to open
Customer
Interface
Rating Plate
Water Container
Filter
Model &
Air Intake Grille
Heat Exchanger Filter Unit
(Pull here to open)
Cover - Handle
Serial Numbers