GB
9
GRATIN
mode
This combination of features increases the effectiveness of
the unidirectional thermal radiation of the heating elements
through forced circulation of the air throughout the oven.
This helps prevent food from burning on the surface,
allowing the heat to penetrate right into the food. Always
cook in this mode with the oven door closed.
Rotisserie spit*
To operate the rotisserie
function (see diagram)
proceed as follows:
1. Place the dripping pan in
position 1.
2. Place the rotisserie
support in position 3 and
insert the spit in the hole
provided on the back panel
of the oven.
3. Start the rotisserie
function by selecting the
or
modes;
Planning your cooking
Programming cooking time with immediate start
1. Turn the PROGRAMMER knob in an anticlockwise
direction until the desired cooking time is displayed.
2. Pull the PROGRAMMER knob and turn it in an anticlockwise
direction until the marker corresponds with the current time. A
click will indicate the end of the programming phase.
3. Select the desired cooking mode using the SELECTOR
knob. The oven switches on immediately and remains on
for the entire duration of the set cooking time.
4. When the set time has elapsed, a buzzer will sound. To
stop the cooking process, turn the PROGRAMMER knob in
an anticlockwise direction until the symbol “ ” is displayed.
5. Turn the SELECTOR knob to the “0” position.
• For example: it is 9:00 a.m. and a time of 1 hour and
15 minutes is programmed. The programme will stop
automatically at 10:15 a.m.
Programming a delayed cooking time
1. Turn the PROGRAMMER knob in an anticlockwise
direction until the desired cooking time is displayed.
2. Pull the PROGRAMMER knob and turn it in an
anticlockwise direction until the marker corresponds with
the desired cooking start time.
3. Select the desired cooking mode using the SELECTOR
knob. The oven will switch on at the set cooking start time and
will remain on for the entire duration of the set cooking time.
4. When the set time has elapsed, a buzzer will sound. To
stop the cooking process, turn the PROGRAMMER knob in
an anticlockwise direction until the symbol “ ” is displayed.
5. Turn the SELECTOR knob to the “0” position.
• For example: it is 9:00 a.m., a time of 1 hour and 15
minutes is programmed and the start time is set to 11:00
a.m. The programme will start automatically at 11:00 and
will end at 12:15.
!
To cancel programming, turn the PROGRAMMER knob
anticlockwise until the symbol “ ” is displayed.
Practical cooking advice
!
Do not place racks in position 1 and 5 during fan-assisted
cooking. Excessive direct heat can burn temperature
sensitive foods.
!
In the BARBECUE and GRATIN cooking modes,
particularly when using the rotisserie, place the dripping pan
in position 2 to collect cooking residues (fat and/or grease).
MULTI-COOKING
• Use position 2 and 4, placing the food that requires more
heat on 2.
• Place the dripping pan on the bottom and the rack on
top.
BARBECUE
• Insert the rack in position 3 or 4. Place the food in the
centre of the rack.
• We recommend that you set the maximum power level.
The top heating element is regulated by a thermostat
and may not always be on.
PIZZA MODE
• Use a light aluminium pizza pan. Place it on the rack
provided.
For a crispy crust, do not use the dripping pan (prevents
crust from forming by extending cooking time).
• If the pizza has a lot of toppings, we recommend adding
the mozzarella cheese on top of the pizza halfway
through the cooking process.
*
Only available in certain models.
Содержание 7OFTR 850 RU/HA
