Hotone AMPERO II Stomp, Руководство пользователя

Страница: 81 / 102

FX Title Description Parameters & Ranges
Signal
Processing
Messe
Bass 400
This model is a preamp simulator based on the famous
Mesa/Boogie® Bass 400* bass amp head, one of
Mesa/Boogie®’s rare bass products. As one of the
most classic most classic and sought-after tube bass
amps in history, the amp will never let you down.
Volume: Controls the gain amount
Master: Controls the effect output
Bass/Middle/Treble: 3-band EQ that controls
the effect tone
Mono I/O
Acoustic(1)
Acoustic
Pre
This model is an acoustic preamp based on the famous
AER® Colourizer 2*, which makes dull sounds come
alive by enriching your acoustic sound with full
dynamics and harmonics.
Volume: Controls the effect gain amount
Volume: Controls the effect output
Tone Mix: Controls the tone control balance;
set to 0 to disable tone control
Tone Depth: Controls the tone brightness
EQ Freq: Controls the EQ center frequency
EQ Q: Controls the EQ bandwidth
EQ Gain: Controls the EQ boost/cut amount;
set to 50 to keep neutral
EQ Freq: Selects from two EQ ranges: f1 (90Hz
to 1.6kHz)/f2 (680Hz to 11kHz)
Enhancer: Controls tone enhancement amount;
turn to minimum (off) to disable enhancer
Mono I/O
FX Title Description
Signal
Processing
CAB(68)
Guitar Cab
Mic Type: Selects from different microphone simulations*:
-Dyn 57: Based on Shure® Sm57
-Dyn 421: Based on Sennheiser® Md421
-Rib 121: Based on Royal® R121
-Rib 160: Based on Beyerdynamic® M160
-Con 87: Based on Neumann® U87
-Con 414: Based on AKG® C414
-Mix 1: Shure® SM57+Sennheiser® MD421 combo
-Mix 2: Shure® SM57+ Royal® R121 combo
-Mix 3: Sennheiser® MD421+Royal® R121 combo
-Mix 4: Multi-mic combo
Volume: Controls the output volume
Low Cut/High Cut: Cuts the low/high frequency
Position: Selects from 6 microphone positioning variations
(
-
Center/Near Center/Cap Edge/Cone/Near Edge/Edge)
Guitar Cab S(30)
Voxy 1x10 A
This model is a cabinet simulator based on the sound characteristics of a VOX®* 1x10”
combo cabinet.
Mono I/O
Voxy 1x10 B
This model is a cabinet simulator based on the sound characteristics of a vintage VOX®*
1x10” combo cabinet.
Voxy GRN 1x10
This model is a cabinet simulator based on the sound characteristics of a VOX®* 1x10”
combo cabinet with a 10-inch Celestion® Greenback* speaker.
Voxy Custom 1x10
This model is a cabinet simulator based on the sound characteristics of a custom VOX®
AC4* combo cabinet.
TWD 1x10
This model is a cabinet simulator based on the sound characteristics of a vintage Fender®
Tweed* 1x10” combo cabinet.
Effect List
Effect Models List
*
The manufacturers and product names mentioned above are trademarks or registered trademarks of their respective owners. The trademarks were used merely to identify the sound character of the products.
79
DESIGN INSPIRATION