Customizing Your Ampero II Stomp
FS4 TAP
and
FS5 TAP
can be set up as follows:
•
Loop Rec/Play: Record/play loop phrases
•
Loop Stop: Stops looper playback
•
Loop Undo/Redo: Executes undo/redo function
•
Loop 1/2 SPD: Switches 1/2 speed record/playback on/off
•
Looper Rev: Switches reverse record/playback on/off
•
Looper: Enter looper menu
•
Looper Exit: Exit looper menu
•
Tuner: Enter/exit tuner
•
Bank+/Bank-: Change banks by toggling up or down
•
Tap Tempo: Tap tempo function
•
Patch+/Patch-: Change patches by toggling up or down
•
CTRL: CTRL function depending on patch settings
•
EXP On/Off: Switching external expression pedal on/off
•
Unit Mode: Switches between Patch mode and Stomp mode
•
A1-B6 On/Off: Switching corresponding slot on/off
Plus:
When set EXP/CTRL FUNC to Single FS, the FS4 TAP defaults to Tap Tempo;
When set EXP/CTRL FUNC to Dual FS, the FS4 TAP defaults to Bank- and FS5 TAP defaults to Bank+.
MIDI Settings
This menu allows you to set up Ampero II Stomp’s MIDI input source, MIDI I/O channels, MIDI clock I/O options.
MIDI IN SOURCE
lets you decide MIDI input source:
•
DIN Only: Receives MIDI messages from MIDI IN jack only
•
USB Only: Receives MIDI messages from USB jack only
•
Mixed: Receives MIDI messages from both MIDI IN and USB jacks
Default is set to Mixed.
INPUT CH (DIN/USB)
and
OUTPUT CH (DIN/USB)
options are for setting MIDI input/output channels of USB/MIDI jacks. The
ranges are all Omni-1-16, defaults are all Omni.
CLOCK SOURCE
lets you choose MIDI clock source for syncing with other devices:
•
Internal: Use internal clock only
•
DIN Only: Uses only external clock, receives MIDI clock messages from MIDI IN jack
•
USB Only: Uses only external clock, receives MIDI clock messages from USB jack
•
Mixed: Uses both internal/external clock sources (receives MIDI clock messages from both MIDI IN and USB jacks); later clock
messages will replace previous messages
Default is set to
Mixed
. If you set clock source to DIN Only or USB only, Ampero II Stomp’s Tap Tempo will not function.
CLOCK OUT (DIN/USB)
switches MIDI clock output on/off. Turn on to use Ampero II Stomp as your main MIDI clock. If you’re
using clock out, the external clock input will be ignored; if you set
CLOCK SOURCE
to
DIN/USB Only
, there will be no MIDI
clock output. Defaults are all set to Off.
34
DESIGN
INSPIRATION
