![Hotone AMPERO II Stomp Скачать руководство пользователя страница 40](http://html1.mh-extra.com/html/hotone/ampero-ii-stomp/ampero-ii-stomp_user-manual_2166024040.webp)
Connecting pedalboards
Set your Ampero II Stomp into your pedalboard, then connect other pedals/controller depending on I/O configurations. When
Ampero II Stomp is used as your core gear, if you’re using FX loop jacks, please make sure FX loop related modules/nodes are
properly set.
Please adjust patch volume properly or volume drop will occur when bypassing/engaging your Ampero II Stomp like a pedal.
Please remember bypass mode (DSP/Analog) may alter the tone a lot (e.g. connected in front of a fuzz pedal). If tonal issue
(which may caused by impedance mismatch) occurs, try to switch to a different bypass mode.
Suggested Setups
38
DESIGN
INSPIRATION