being too aggressive or that make too much foam.
CAUTION: Disconnect the plug from the outlet before starting the cleaning operations.
CAUTION: Do not completely submerge the unit in water for cleaning
CAUTION: Do not clean the appliance with a jet of water.
WARNING: take care to correctly reassemble the seal at its head, so that the lid closes
correctly.
Clean the inside of the bowl with a slightly dampened, non-abrasive sponge. Do this only
and exclusively when the machine is off and cold. Before cleaning the bowl, always make sure
that the blades are dismantled, in order not to run the risk of cutting.
HOW TO OPERATE
• Place the appliance on a flat surface, so that it will be in a stable position.
• Connect the equipment to the mains voltage.
• Switch on the appliance by keeping the main switch pressed, the display will then switch on
automatically and showing the HotmixPRO logo.
To ensure safety and respect of energy saving, if you do not set any parameters, after about 5
minutes the unit will shut down, setting in "standby" position and displaying the Hotmix Pro
logo.
Just press any key to put the device back into operation.
SETTING THE FUNCTIONS
• Select the icon of the function.
• Use the "+" and "-" buttons to set the digits.
• Set the functions necessary to make food preparations, always use this recommended
sequence:
1. Temperature
2. Speed
3. Time
4. Start / Stop
WARNING: at the first use, it is possible that the device emit a low noise, due to the
internal stabilization of the joints. That is normal, and it will disappear in a short time.
CORRECTION OF DATA SET
When working you can change the parameters of speed, time and temperature and, with the
