5
M8 x 20mm
Screw (57)–4
3/8" x 3/4" Button
Screw (65)–4
M8 x 20mm Flat
Head Screw (56)–4
M10 x 12mm
Screw (77)–6
M10 Flat
Washer (80)–4
ASSEMBLY
Assembly requires two persons.
Place all parts of the exercise cycle in a cleared area and remove the packing
materials. Do not dispose of the packing materials until assembly is completed.
In addition to the included tool(s), assembly requires a Phillips screwdriver
, an adjustable
wrench
, and a rubber mallet
.
As you assemble the exercise cycle, use the drawings below to identify small parts. The number in parentheses
below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number
following the parentheses is the quantity needed for assembly.
Note: If a part is not in the hardware kit, check
to see if it has been preassembled.
