This track section uses several supports. Attach
them as shown. To assemble a track support, sepa-
rate the pieces as shown and snap off the connec-
tor tabs (discard the tabs). Next, fit the two pieces
together as shown. Insert the assembled track
support into the round hole on the underside of the
track as shown.
c
1
4
3
A.
A
A.
B
A.
F
A.
C
A.
D
A.
E
E
SQUEEZE
TRACK
SECTION
You
Are
Here
You’re almost done! Now let’s assemble the squeeze track
section and complete our layout. The following drawings
show you, step by step, how to assemble this section.
Take
your time, and refer to the Layout Drawings on the
Assembly Map if you need to.
These are the pieces you’ll need to assemble this section.
a
G
G
S
A
F
C
F
Assemble the track pieces as shown.
3 x GUARDRAILS
2 x 9" RADIUS CURVE
1 x #1 SUPPORT
1
1 x #3 SUPPORT
3
1
2
C
1 x 6" STRAIGHT
1 x 15" SQUEEZE
S
1 x 9" TERMINAL
TRACK
1 x #4 SUPPORT
4
G
2 x 9" RADIUS 1/8
2 x CLIPS
Add 3 guardrails as shown. To attach a guardrail:
gently flex the guardrail before attaching it.
Carefully attach the bottom of the guardrail first.
Then pull up and snap into place. Don’t force
guardrails into place.
b
Now attach the squeeze track section to the
corkscrew curve section (on one side) and to the
straightaway section (on the other). Your track lay-
out is complete! Let’s go on to power connection.
BLUE
B1964-0920G1 DAREDEVIL CHALLENG 2/21/03 9:55 AM Page 6
